Uk-plumbing.com

Cordless radial press with automatic circuit control Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for allcommon pressfitting systems. For battery and cordedoperation.
Complete range of REMS pressing tongs Mini for allcommon pressfitting systems, see page 100–105.
REMS Mini-Press ACC – universal up to Ø 40 mm.
Super light, super small, super handy.
With automatic circuit control. Secure crimping in
seconds. Automatic locking of the pressing tongs.
Complete assortment of REMS pressing tongs Mini
for all common pressfitting systems.
Pressing tongs for all common systems
Complete assortment of REMS pressing tongs Mini for all common pressfitting
systems (page 100 – 105). High-compression pressing tongs in forged and
specially hardened steel. Pressing contours of REMS pressing tongs are system-
specific and correspond to the respective pressfitting system. Thus perfect
system-conformity, safe press jointing.
Execution
Super light, super small, super handy. Drive unit with battery Li-Ion only 2.4 kg.
Drive unit with pressing tongs under 34 cm. Works anywhere, free-hand, overhead,
also in particularly tight areas. Optimum weight distribution for single-hand
operation. Ergonomically designed housing. Swivelling pressing tongs seat. Secure
seating of pressing tongs by automatic locking. For battery and corded operation.
Pressing operation by touch-control with ACC
For reliable service, operating and functional safety. Automatic retraction after
completion of pressing operation (automatic circuit control).
Drive
Enormous thrust and pressing force for fast and perfect press jointing.
Powerful electro-hydraulic drive with powerful battery motor 12 V, 290 W output
(Ni-Cd)/14,4 V, 420 W output (Li-ion), robust planetary gear, eccentric
reciprocating pump and compact high power hydraulic system. Safety tip switch.
Battery or mains operation
Ni-Cd-Technology: Battery Ni-Cd 12 V, 1,3 Ah or battery Ni-Cd 12 V, 2,0 Ah, for
a large number of pressings. Rapid charger for short charging times (1 h). Pulse
charging technique reduces memory effect for maximum battery performance.
Voltage supply Ni-Cd 230 V for mains operation instead of battery Ni-Cd 12 V,
as accessory.
Li-Ion-Technology: Battery Li-Ion 14.4 V, 1.3 Ah or battery Li-Ion 14.4, 2.2 Ah.
20 % faster than Ni-Cd 12 V. Low weight. High energy density for approx. 50 %
more pressings. Overheating and overloading protection by temperature monitor
(NTC). Rapid charger for short charging times (1 h). No memory effect for
maximum battery performance. Voltage supply Li-Ion 230 V for mains operation
instead of battery Li-Ion 14.4 V, as accessory.
Confirmation of suitability
See page 119.
Hold-Harmless and Indemnification Agreement
See page 120.
Supply format
REMS Mini-Press ACC Basic-Pack. Cordless radial press with automatic
circuit control for producing pipe pressing joints Ø 10 – 40 mm. For operating with
REMS pressing tongs Mini. Swivelling pressing tongs seat with automatic
locking. Electro-hydraulic drive with powerful battery motor, obust planetary gear,
eccentric reciprocating pump and compact high power hydraulic system,
Safety tip switch. Battery, rapid charger Li-Ion/Ni-Cd 230 V or 110 V, 50 – 60 Hz,
65 W. In sturdy steel case.
REMS Mini-Press ACC Ni-Cd Basic-Pack
battery motor 12 V, 290 W, battery Ni-Cd 12 V, 1,3 Ah
REMS Mini-Press ACC Li-Ion Basic-Pack
battery motor 14,4 V, 420 W, battery Li-Ion 14,4 V, 1,3 Ah
REMS pressing tongs Mini see page 100– 105.
Battery Ni-Cd 12 V, 1,3 Ah
Battery Ni-Cd 12 V, 2,0 Ah
Battery Li-Ion 14,4 V, 1,3 Ah
Battery Li-Ion 14,4 V, 2,2 Ah
Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W
Voltage supply Ni-Cd 230 V
Voltage supply Li-Ion 230 V

Source: http://www.uk-plumbing.com/brochure/REMS/MiniPress.pdf