Site brasileiro onde você pode comprar qualidade e entrega viagra preço cialis barato em todo o mundo.
Hoffer hit-2a digital flow rate indicator and totalizer specification datasheet
TURBINE FLOWMETERS BY
Rate Indicator & Totalizer
Perfecting Measurement TM
TECHNICAL DATA SHEET
♦ 5 Digit Rate Display, 8 Digit Totalizer Display. ♦ Local Magnetic or Remote Reset. ♦ 4-20mA Analog Output. ♦ Powered From Battery, DC Supply, 4-20mA Output
♦ 20 Pt. Linearization Option. ♦ Isolated Scaled Pulse Output. ♦ Alarm Output for Rate or Total. ♦ Windows® Configuration Program. ♦ RS 232 Port for Configuration and Monitoring. ♦ Diagnostics for Pulse, Alarm and Analog output. ♦ Password Protection for Menu and Reset.
RATE DISPLAY: (SELECTABLE DECIMAL)
5 Digits (99999), 0.5” High, Display updates once
Featuring 5 digits of rate and 8 digits of total, the
HIT-2A is a DC, AC, loop or battery powered indicator
capable of accepting magnetic pickup, DC pulse or switch
10 segment bar graph display for rate trend.
closure inputs. The unit can be ordered with an optional
loop powered 4-20mA output. The HIT-2A uses the 4-
TOTALIZER DISPLAY: (SELECTABLE DECIMAL)
20mA loop to provide power when this output is used.
Totalizer Descriptors: GAL, LIT, FT3, M3, BBL
LOW BATTERY WARNING DISPLAY
(Displays with approx. 10% of the power remaining)
Supplied with 2 C-size Lithium battery pack.
The pulse output advances with the least significant
Battery Life Expectancy*
Opto-isolated open collector transistor: 100 VDC,
*Life expectancy without pulse or alarm outputs selected.
Pulse Output Rate: Selectable (see below).
DC POWER INPUT
Pulse output divider: User selectable, )1, )10, )100 or
OFF. NOTE: Select OFF for max. battery life.
Protection: Reverse Polarity Protection Loop Burden: 8V maximum.
AC POWER INPUT UNIVERSAL
Opto-isolated open collector transistor: 100 VDC,
Windows® is a registered trademark of Microsoft.
The Hit-2A can use the 4-20 mA loop power as its
CE approval (optional).
0 - 90% Non-condensing Accuracy:
Basic Model Number
A. Enclosure Style:
NEMA 4X Enclosure (Hit-2A behind clear cover)
MAGNETIC PICKUP INPUT
Explosion-Proof Housing. Class I, Division I, Groups B, C
& D. Class II, Division I, Groups E, F & G.
OPTO-ISOLATED DC PULSE INPUT
Panel Mount Enclosure with Clear Door and Lock.
Nema 1 Enclosure. HIT-2A Mounted to the outside of
Clear Cover. For indoor/dry installation only.
Frequency Range: 0 to 5000 Hz Min. Pulse Width: 0.1 msec
B. Input Power:
CONTACT CLOSURE INPUT (CONTACT
Internal Batteries, two supplied. (Option A not available for use
Internal Pullup Resistor: 220 KΩ to +3.3
Enter (X) if loop powered analog output option C or D below is
High (logic 1): Open or 4-30 VDC C. Loop Powered Analog Output:
Loop Powered with 4 -20mA Output (8 to 30 VDC)
RESET INPUT (CONTACT CLOSURE TO COMMON)
Loop Powered with 4 -20mA Output and 2 internal batteries
Internal Pullup Resistor: 100 KΩ to +3.3
High Alarm* opto isolated open collector
*Note: Either low or high alarm available, not both.
With local resettable external
magnet or optional remote reset.
Nema 4x Style 2 enclosure mounted on turbine. Must be used with “X” riser turbine option.
FHT 8” long temperature riser for Nema 4x Style 2 enclosure mounted on turbine. Required when fluid
temperature exceeds 140 deg. F. Must be used with “X” riser turbine option.
Explosion-proof Style 3 enclosure mounted on turbine. Must be used with “X” riser option on turbine.
FXHT 8” long temperature riser for Explosion-Proof Style 3 enclosure mounted on turbine. Required when
temperatures exceed 140 deg. F. Must be used with “X” riser turbine option.
Nema 4X enclosure pipe mounting kit 2" pipe or smaller. Specify if pipe is vertical or horizontal.
20 POINT LINEARIZATION OPTION
F. Special Features:
(Multiple Options Available)
This feature allows the user to enter up CE CE Mark required for Europe.
Any Special Features that are not covered in the Model Number. Use a written description of the –SP.
different corresponding K-Factors to improve flowmeter accuracy to ±0.1%.
Analog Output Option:
Opto-isolated open collector transistor is standard with all units.
A local reset magnet is standard with all units except if remote reset option is selected.
Two batteries are required for battery powered units. One battery is required for all other power options to retain total display if power fails.
Two Wire hookup Accuracy: 0.02% Full Scale @ 20°C
» HITC Spare Battery: Tadiran P/N TL2200/S. 3.6 V 5500mAh or equal.
» 115-24 Universal 100-240 VAC to 24 VDC power supply. Note: To mount in explosion -proof enclosure, select (3) above under enclosure style. Power supply
» Windows based setup disk and 6 foot communication cable.
HOFFER FLOW CONTROLS, INC.
107 Kitty Hawk Lane, P. O. Box 2145, Elizabeth City, NC 27906-2145
800-628-4584 252-331-1997 FAX 252-331-2886
The quality system covering the design,
www.hofferflow.com email: email@example.com
manufacture and testing of our products is
The specifications contained herein are subject to change without notice and any user of said specifications
certified to International Standard ISO 9001.
should verify from the manufacturer that the specifications are currently in effect. Otherwise, the manufacturer
assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.
Manuel Justiniano de Freitas Quintão Em 16 de dezembro de 1955, em sua residência, à Rua Martin Lage, no Méier,desencarnou Manuel Justiniano de Freitas Quintão. Foi sócio da Federação EspíritaBrasileira durante 44 anos e ocupou-lhe a presidência em 1915, 1918, 1919 e 1929. Publicou vários trabalhos, entre os quais "O Cristo de Deus". Em 1939 escreveu a sua própria biograf
ProMinent® Chemical Resistance List Resistance of Materials Used in Liquid Ends to the Chemicals Most Frequently Used The data apply to standard conditions (20 °C, 1,013 mbar). = For bonded connections, the resistance of the adhesive (e.g. Tangit) is to be considered. (Materials of the types 'o' and '-' are not recommended !)= does not apply to glass fibre reinforced materialCo