Txxx xxxxx

The Embedded I/O Company
TPMC917 4 Channel Serial Interface RS232 with 4 Mbyte NV-SRAM

Application Information
Technical Information
The TPMC917 is a standard single-width 32 bit PMC  Standard single-width 32 bit PMC module conforming module providing 4 Mbyte SRAM with battery backup by an on board lithium cell for all SRAM devises, and four ESD protected RS232 channels (TPMC917-10 only). The 4 Mbyte NV-SRAM is organized in two banks, each of  4 Mbyte NV-SRAM with battery backup by on board them provides 512k x 32 bit memory. During normal operation (standard 5V supply applied to the SRAM’s) the  Battery capacity is monitored every 24 hours capacity of the lithium cell is monitored every 24 hours by  Interrupt can be generated to control battery the battery monitor device and an interrupt can be generated if the battery voltage is too low. The monitor  4 channel serial RS232 interface, ESD protected device switches the power supply of the SRAM’s from the standard 5V to the battery if the 5V supply drops below the  64 byte transmit FIFO per channel, 64 byte receive threshold level of the battery monitor device. Any active access to the SRAM’s at this point is executed correctly  Programmable baud rates up to 115.2 Kbaud within 1.5µs. After this time any further accesses to the SRAM’s are not possible. A miniature DIP switch allows the selection of the battery backup source either from the on board lithium cell or from an external battery via the P14 I/O connector. The TPMC917-10 provides four RS232 channels. Each channel has a programmable baud rate up to 115.2 Kbaud. The 4 channel UART16C654 provides 64 byte transmit FIFO and 64 byte receive FIFO for each channel to significantly reduce the overhead required to provide data to and get data from the transmitter and receiver. The FIFO trigger levels are programmable. The channels are ESD protected up to +/-15kV according to the human body model Order Information
TPMC917-10
4 MByte NV-SRAM with Battery Backup and 4 Channel Serial RS232 TPMC917-20
TPMC917-DOC User Manual
TPMC917-ED
Engineering Documentation, includes TPMC917-DOC
TA303-10
Cable Kit for modules with DB25 connector TPIM001-10
PIM I/O Module with HD50 SCSI-2 type connector For First Time Users the Engineering Documentation TPMC917-ED is recommended. The Engineering TPMC917-SW-12 OS-9 Software Support; OS-9 V2.2
Documentation includes TPMC917-DOC, schematics and TPMC917-SW-32 pSOS Software Support
Driver support (TPMC917-SW-xx) for different operating TPMC917-SW-42 VxWorks Software Support
TPMC917-SW-62 Windows NT 4.0 Software Support
TPMC917-SW-65 Windows XP/2000 Software Support
TPMC917-SW-72 LynxOS Software Support
TPMC917-SW-82 LiNUX Software Support
TPMC917-SW-92 QNX 4 Software Support
TPMC917-SW-95 QNX 6 Software Support
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice TEWS TECHNOLOGIES GmbH
TEWS TECHNOLOGIES LLC

Source: http://systerra.eu/documents/TPMC917%20DS.pdf